Mobile Key from 2N empowers you with the ability use your mobile phone as your access credential and the key to your doors. Harness the versatility of Bluetooth technology and the strength of AES encryption over our proprietary channel to ensure maximum convenience without compromising on security. Benefit from the option of NFC door unlocking too, if your phone and 2N reader supports it.
Used in combination with an appropriate 2N® IP Intercoms or Access Units, Mobile Key offers a robust and reliable keyless access solution. Generate or remove credentials remotely, allowing you instant control and easy management of access.
Operation modes include:
‘Touch mode’, which lets you open the door without removing your phone from your pocket or bag, simply by touching the reader. Enjoy a seamless and convenient access experience even if your hands are full.
‘Tap-in-app mode’, which allows you to trigger door opening form a greater distance by tapping the button in the app. Perfect for car park or garage access.
Other features include:
• Unlimited free credentials
• Vibration feedback
• AES encryption
• Time limited access
• Home screen widget
• NFC door unlock option
Setup Instructions:
• Download and install the app
• Choose whether you wish to use Bluetooth only, Bluetooth & NFC or NFC only in the app
• Choose the authentication mode (‘Tapin-app’ or ‘Touch’) in your Bluetooth enabled 2N® IP Intercom or Access Unit. Add a new user to its directory and generate a pairing PIN code
• If you wish to use NFC then ensure that NFC is selected in your NFC enabled 2N® IP Intercom or Access Unit (you will need to install an NFC license to the 2N device)
• Start pairing mode in the app and select the device you wish to pair (you must be within range of the device. For ‘Touch’ mode you must touch the device for it to become visible in the app)
• Enter the pairing PIN code when prompted
• After successful pairing, you may now enter the door with the app
يمكّنك مفتاح الجوال من 2N من القدرة على استخدام هاتفك المحمول باعتباره بيانات اعتماد الوصول ومفتاحًا لأبوابك. استفد من تعدد استخدامات تقنية Bluetooth وقوة تشفير AES على قناتنا الخاصة لضمان أقصى قدر من الراحة دون المساومة على الأمان. استفد من خيار فتح باب NFC أيضًا ، إذا كان هاتفك وقارئ 2N يدعمان ذلك.
يُستخدَم مفتاح الهاتف المحمول مع أجهزة الاتصال الداخلي أو وحدات الوصول المناسبة 2N® IP ، ويوفر حل وصول قويًا وموثوقًا بدون مفتاح. قم بإنشاء أو إزالة بيانات الاعتماد عن بعد ، مما يتيح لك التحكم الفوري وسهولة الوصول.
تتضمن أوضاع التشغيل:
"وضع اللمس" ، الذي يتيح لك فتح الباب دون إزالة هاتفك من جيبك أو حقيبتك ، بمجرد لمس القارئ. استمتع بتجربة وصول سلسة ومريحة حتى لو كانت يديك ممتلئة.
"وضع النقر داخل التطبيق" ، الذي يسمح لك بتشغيل فتح الباب من مسافة أكبر من خلال النقر على الزر في التطبيق. مثالية لوقوف السيارات أو المرآب.
تشمل الميزات الأخرى:
• أوراق اعتماد مجانية غير محدودة
• ردود فعل الاهتزاز
• تشفير AES
• وصول محدود الوقت
• القطعة الشاشة الرئيسية
• خيار فتح باب NFC
تعليمات الإعداد:
• تنزيل وتثبيت التطبيق
• اختر ما إذا كنت ترغب في استخدام Bluetooth فقط أو Bluetooth & NFC أو NFC فقط في التطبيق
• اختر وضع المصادقة ("Tapin-app" أو "Touch") في الاتصال الداخلي 2N® IP الداخلي أو وحدة الوصول. أضف مستخدمًا جديدًا إلى دليله وأنشئ رمز PIN للاقتران
• إذا كنت ترغب في استخدام NFC ، فتأكد من تحديد NFC في نظام الاتصال الداخلي 2N® IP أو وحدة الوصول التي تم تمكين NFC بها (ستحتاج إلى تثبيت ترخيص NFC على جهاز 2N)
• ابدأ وضع الإقران في التطبيق وحدد الجهاز الذي ترغب في إقرانه (يجب أن تكون ضمن نطاق الجهاز. بالنسبة إلى وضع "اللمس" ، يجب أن تلمس الجهاز ليصبح مرئيًا في التطبيق)
• أدخل رمز PIN الخاص بالاقتران عند المطالبة بذلك
• بعد الاقتران الناجح ، يمكنك الآن الدخول إلى باب التطبيق